for this operation are as follows:
Source = ADAT
Destination = S/PDIF
Destination Rate = 44.1kHz
Figure 13
3.3J S/PDIF to ADAT (44.1kHz)
In this configuration, the ADAT optic jacks and the S/PDIF jacks are
used. In the figure below, ADAT #1 is receiving from an S/PDIF
device using a 44.1kHz sampling rate without conversion. The
proper control settings for this operation are as follows:
Source = S/PDIF
Destination = ADAT
Destination Rate = 44.1kHz
Figure 14
37