Akai MPC 2000XL Operator's Manual page 41

7. While the Loop: field is selected, press OPEN WINDOW to open the Loop window.
......................................................................................................
........................................................................................................
8. Select the First bar: field with the CURSOR keys and set to 1 with the DATA wheel.
9. Select the Last bar: field with the CURSOR keys and set to END with the DATA wheel.
Close the Loop window by pressing CLOSE [F4].
10. Select the Count: field with the CURSOR keys and rotate the DATA wheel to the right to
turn it ON.
Sq:01-Sequence01
.......................................................
™:120.0(MAS)
Count:
..................................................................................................
Tr:01:(Unused)
S:DRUM1:OFF New Pgm-A S:DRUM1:OFF New Pgm-A
STEP
11. While the Count: field is selected, press OPEN WINDOW to open the Count/Metronome
window.
......................................................................................................
....................................................................................
Wait for key:OFF Wait for key:OFF
........................................................................................................
12. Select the Count in: field with the CURSOR keys and select REC ONLY with the
DATA wheel. Also select the In rec: field and set to YES by rotating the DATA wheel to
the right.
......................................................................................................
....................................................................................
Wait for key:OFF Wait for key:OFF
........................................................................................................
13. Press CLOSE [F4] to close the Count/Metronome window and return to the main window.
14. Start recording by holding down REC and pressing OVER DUB. After a one bar count, record-
ing will start and the bar.beat.tick numbers in the Now: field will start to increase. Play the
drum pads to the click or drum sounds.
When the two bars have been recorded, the numbers will automatically return to the first bar
and you can keep overdubbing as the bars loop.
15. To finish recording, press STOP. You can play back the loop by pressing PLAY START.
If you want to delete the recording, press UNDO SEQ and you can start again (see page 5 No.
10 for full explanation of this key).
Loop
First bar: First bar:
Last bar:END Last bar:END
Number of bars: 2 Number of bars: 2
CLOSE
Timing:OFF
ON Loop: ON Loop: ON
@
ON:YES
EDIT TrMUTE SOLO
Count/Metronome
Count Count IN: IN:REC ONLY REC ONLY
Rate:1/4
CLOSE
Count/Metronome
Count IN:REC ONLY Count IN:REC ONLY
Rate:1/4
CLOSE
Page 29
Chapter 3: Recording Sequences
1
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 2 Bars: 2
Pgm:OFF
Velo%:100
Tr - Tr +
In play: NO In play: NO
In rec :YES In rec :YES
SOUND
In play: NO In play: NO
In rec : In rec :YES
SOUND