Selecting A Program And Assigning A Sound; Selecting Programs - Akai MPC 2000XL Operator's Manual

Selecting a Program and Assigning a Sound

There are five screens in program edit mode and the following are the functions:
1. Assign Screen
2. Parameter Screen Edits the tone using the envelope, filter, etc.
3. DRUM screen
4. PURGE screen
5. AUTO screen
Hold down SHIFT and press PROGRAM (numeric key 6), then select "DRUM 1-4". This first
screen is the "ASSIGN" screen for assigning sounds to a program.
Pgm:
.......................................................
Pad:A01=Note:37
..................................................................................................
Note:60=Snd:OFF
Mode:NORMAL
ASSIGN
You can listen to the selected sound at its full velocity by pressing PLAY [F6].

Selecting Programs

Pgm:
.......................................................
Pad:A01=Note:37
..................................................................................................
Note:60=Snd:OFF
Mode:NORMAL
ASSIGN
Move the cursor to the Pgm: field and select a program by rotating the DATA wheel. The pro-
gram number and program name will be displayed.
CAUTION: If there are no other programs saved or loaded, turning the DATA wheel will have
no effect.
Assigns a note number to the pad, and a sound to the note number.
To select "DRUM 1 - 4" and for MIDI setup of the internal sampler.
To erase all unused sounds (sounds not assigned to programs) from
memory.
To automatically assign sounds in semi-tone steps to the 64 drum pads
(PAD A01 - D16) – note range 35 - 98 on a MIDI keyboard.
1-NewPgm-A
PARAMS DRUM
1-NewPgm-A
PARAMS DRUM
Page 113
Chapter 7: Creating and Editing Programs
Pad assign:PROGRAM Pad assign:PROGRAM
PURGE AUTO PLAY
Pad assign:PROGRAM Pad assign:PROGRAM
PURGE AUTO PLAY