Formatting The Flash Rom - Akai MPC 2000XL Operator's Manual

Flash ROM
By installing the optional flash ROM board FMX008M (which has 8MB of memory), you can save
data to the flash ROM. Saving data to the flash ROM saves RAM space.
When you are installing the flash ROM board, please refer to the manual supplied with it.

Formatting the Flash ROM

Before using the flash ROM, you must format it first. Enter Disk mode by holding down
SHIFT and pressing LOAD (3 on the numeric pad). Select F-ROM in the Device: field
and press FORMAT [F3] to display the format screen.
Device:F-ROM
.......................................................................................................................
LOAD
Press DO IT [F6].
The above message appears, and the format begins when you press DO IT [F5].
Note: Once formatting is carried out, all of the data on the flash ROM will be
erased.
THIS WILL ERASE THE ENTIRE DISK!! THIS WILL ERASE THE ENTIRE DISK!!
SAVE FORMAT SETUP
....................................................................................
Format F-ROM Format F-ROM
THIS WILL ERASE THIS WILL ERASE
THE ENTIRE F-ROM!! THE ENTIRE F-ROM!!
........................................................................................
Page 173
DO IT
CLOSE DO IT
Chapter 11: Flash ROM