Akai MPC 2000XL Operator's Manual page 39

6. Select the Loop: field with the CURSOR keys and rotate the DATA wheel to the left to select
OFF.
Sq:01-Sequence01
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01:(Unused)
S:DRUM1:OFF New Pgm-A S:DRUM1:OFF New Pgm-A
STEP
7. Select the Count: field with the CURSOR keys and rotate the DATA wheel to the right to
turn it ON.
Sq:01-Sequence01
.......................................................
™:120.0(MAS)
Count:
..................................................................................................
Tr:01:(Unused)
S:DRUM1:OFF New Pgm-A S:DRUM1:OFF New Pgm-A
STEP
8. While still on the Count: field, press OPEN WINDOW to open the Count/Metronome win-
dow.
......................................................................................................
........................................................................................................
9. Select the Count in: field with the CURSOR keys and select REC ONLY with the DATA
WHEEL. Then, select the In rec: field and rotate the DATA wheel to the right and set it to
YES.
......................................................................................................
........................................................................................................
10. Press SOUND [F5] and select a metronome sound (CLICK, DRUM 1, 2, 3 or 4).
If you select CLICK, select and adjust the Volume: level and Output: (where the
sound will be output from).
If you select DRUM 1, 2, 3 or 4, you can select 2 drum sounds (Accent: and
Normal:) that will play as the metronome sound. You can select the sounds by pressing
one of the drum pads or selecting the sound in the corresponding field. Then move to and
adjust the velocity level of the sounds.
11. Press CLOSE [F4] twice to return to the Main Screen.
12. Hold down REC and press PLAY START to start recording. After a one bar count, recording
will start and the bar.beat.tick numbers in the Now: field will start to increase. Play the drum
pads to the click or drum sounds.
13. Bars will automatically be added when the number of bars set in step 5 is exceeded. To stop
in the middle of a recording, press STOP. You can play back the recorded sequence by
pressing the PLAY START key.
Timing:OFF
Loop:OFF
EDIT TrMUTE
Timing:OFF
ON Loop:OFF
EDIT TrMUTE
Count/Metronome
Count IN:REC ONLY
Rate:1/4
....................................................................................
Wait for key:OFF
Count/Metronome
Count IN:REC ONLY Count IN:REC ONLY
Rate:1/4
....................................................................................
Wait for key:OFF Wait for key:OFF
Page 27
Chapter 3: Recording Sequences
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 2 Bars: 2
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 2 Bars: 2
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
In play: NO
In rec :YES
CLOSE SOUND
In play: NO In play: NO
In rec : In rec :YES
CLOSE SOUND