Midi Sample Dump - Akai MPC 2000XL Operator's Manual

MIDI Sample Dump

Sound data can be transmitted and received between the MPC2000XL and external devices via
MIDI using the MIDI Sample Dump Standard Format.
Sample Dump Setting
Connect the MPC2000XL and external device with MIDI cables in the hand shake method (Con-
nect MIDI OUT of MPC2000XL to MIDI IN of the external device, and MIDI IN of MPC2000XL to
MIDI OUT of the external device). Hold down SHIFT and press MIDI/SYNC (9 on the numeric pad)
to display the MIDI/SYNC mode screen and press DUMP [F2] key.
RECEIVE
..................................................... .......................................................
Receive ready while Receive ready while
this page is open. this page is open.
Request No.: Request No.:
SYNC
Receiving Sample Data
Selecting the MIDI Input/Output Terminals
Select the MIDI Input and Output terminals used for the connection with the external device in the
In: and Out: fields respectively.
Setting the Device ID
Match the device ID number with that of the external device in the Device ID: field of the
TRANSMIT screen.
Selecting the Request Number
You can specify which sound to receive from the external device by selecting the sound number in
the Request No.: field. Please refer to the instruction manual of the external device for the
assignment of sounds and sound numbers.
Note: Not necessary to set if Request is not sent.
Receiveing Sample Dump
Sample Dump receive is started either by sending the sample data from the external device, or
sending the Sample Dump Request to the external device by pressing REQUES [F5]. While the
Sample Dump data is being received, the following message will appear.
RECEIVE
..................................................... .......................................................
Receive ready while Receive ready while
this page is open. this page is open.
Request No.: Request No.:
Receiving.....
Chapter 12: MIDI/SYNC Mode, OTHER Mode
(In:2) TRANSMIT
Snd:
sound1
0 0 device ID: device ID:
DUMP MIDIsw
(In:2) TRANSMIT
Snd:
(no sound) (no sound)
0 0 device ID: device ID:
Page 183
(Out:B)
0 0
REQUES SEND
(Out:B)
0 0
CANCEL