Technical Specifications - Akai MPC 2000XL Operator's Manual

Technical Specifications

General
• Display ............................. 248 x 60 dot graphic LCD
• Disk drive ......................... 3.5 inch 2HD/2DD
• Dimensions ...................... 405(W) x 106(H) x 331(D) mm
• Weight .............................. 5.5 kg
• Power requirements ......... 100-240 VAC, 50/60Hz, 23W (13W without option)
• Memory expansion slot .... 2 / 72-pin SIMM (70ns)
Sound Generator
• Sampling rate ................................ 44.1kHz (frequency response: 20Hz-20kHz)
• Sampling capacity ......................... 2MB standard (21.9 seconds mono or 10.9 seconds
• Data format ................................... 16-bit linear
• Dynamic filtering ........................... 12dB/Octave dynamic resonant lowpass filter per voice
• Maximum sounds in memory ........ 256
• Number of sound programs .......... 24
• Sound assignments per program .. 64
• Simultaneous voices ..................... 32
Sequencer
• Maximum events ........................... 300,000 notes (maximum 50,000 notes per sequence)
(notes equivalent)
• Resolution ..................................... 96 parts per 1/4-note (ppq)
• Sequences .................................... 99
• Tracks per sequence .................... 64
• MIDI output channels .................... 32 (16 channels x 2 output ports)
• Song mode .................................... 20 songs, 250 steps per song
• Drum pads .................................... 16 (velocity and pressure sensitive)
• Drum pad banks ............................ 4
• Sync modes .................................. MIDI clock and SMPTE (optional). SMPTE frame rates
Rear Panel Inputs/Outputs
• Record input (both L and R) .......... 1/4-inch stereo phone x 2, balanced -40dBu, input
• Digital sampling input .................... RCA-pin x 1, S/PDIF (optional)
• Digital master output ..................... RCA-pin x 1, S/PDIF (optional)
• Stereo output ................................ 1/4-inch phone x 2, unbalanced +11dBu, output Imp.
• 8 individual outputs ....................... 1/4-inch phone x 8, unbalanced +11dBu, output Imp.
• Headphone output ........................ 1/4-inch stereo phone x 1, 200mW/32
• MIDI inputs .................................... 5-pin DIN x 2
• MIDI outputs .................................. 5-pin DIN x 2 (independent)
• SCSI port ...................................... 50-pin high-pitch SCSI connector x 1
stereo), expandable to 32MB.
supported are 24, 25, 29.97 drop and 30.
Imp. 39k ; Max. input level +10dBu
100 ; Max. output level +17dBu
100 (optional); Max. output level +17dBu
Page 193
Chapter 13: Appendix