Inserting Blank Bars Into A Sequence - Akai MPC 3000 Operator's Manual

Inserting Blank Bars Into a Sequence

To rearrange tracks, first enter the desired sequence number. Then
enter the track number to be moved in the
the Before track
moved track will be inserted before. Press
move.
This feature inserts a specified number of blank bars into the
current sequence. Select option 3 (
the SEQ EDIT key menu, and the following screen will appear:
========== Insert Blank Bars ===========
Sequence:12-Sequence_name
Number of bars:
Time signature: 4/ 4
Insert before bar:
========================================
<Do it>
The fields and soft key are:
Sequence
• The field:
This is the sequence into which the bars will be inserted. The
sequence's name is shown to the right.
• The Number of bars
This is the number of blank bars to be inserted.
Time signature
• The
This is the time signature of the bars to be inserted. This is actually
two fields—one for each part of the time signature. The range of the
first part is from 1 to 31; the second part is a choice field with four
selections: 4, 8, 16, and 32.
Insert before bar
• The
This field specifies the bar number before which the new bars will
be inserted. To insert bars after the end of the sequence, enter a
number one higher than that of the last bar in the sequence.
• The <Do it> soft key:
Pressing this soft key performs the insertion according to the above-
displayed parameters.
COMMENT: If the sequence is set to loop to an earlier bar (in
the time signature/ending status screen) and the new bars
are inserted before the loop bar, the bar number specified in
Page 79
Chapter 4: Editing Sequence
Place track
field, enter the number of the track that the
<Do it>
Insert blank bars
4
4
field:
field:
field:
field. In
to execute the
) from