Sending Midi Time Code In Real Time While Playing - Akai MPC 3000 Operator's Manual

MPC3000 Software Update Version 3.1 Operator's Manual

Sending MIDI Time Code In Real Time While Playing

The MPC3000 may now send MIDI Time Code out over MIDI in real time as
a sequence or song plays. MIDI Time Code is an industry-standard for send-
ing SMPTE time code data over MIDI.
To send MIDI Time Code in real time as a sequence or song plays, go to the
Sync screen by pressing TEMPO/SYNC, then <Sync>:
===== Sync In ======
Mode:MIDI CLOCK
Shift early (ms):20
MIDI Input:2
Song pointer:ON
====================
<SyncIn=OFF>
Notice the new MIDI tm code field on the right side of the screen. It is a
choice field with five options:
OFF: No MIDI Time Code is sent.
OUT A: MIDI Time Code is sent out over MIDI output A.
OUT B: MIDI Time Code is sent out over MIDI output B.
OUT C: MIDI Time Code is sent out over MIDI output C.
OUT D: MIDI Time Code is sent out over MIDI output D.
Page 12
==== Sync Out ====
MIDI clock:OUT A
MIDI tm code:OUT A
==================
<GenSMPTE>