Akai MPC 3000 Operator's Manual page 111

Chapter 4: Editing Sequence
• The Stereo Pan event
>Stereo_pan
This message is exclusive to the MPC3000 and is used to change the
stereo mixer pan setting of a particular sound in mid-sequence.
When the Record Live Changes feature is used (accessed by pressing
MIXER/EFFECTS, then 4), many of these events are recorded into
the active track to simulate a smooth and continuous mixer pan
change. There are two fields:
Pad
1. The field:
This field determines which of the 64 pad numbers/pan
pots (A01-D16) this message will affect.
2. The Val field:
This field contains the actual pan pot value (50L - C -
50R).
• The Output/Effect Volume event
>Output/effect_volume Pad:A01
This message is exclusive to the MPC3000 and is used to change the
individual output/effects mixer volume setting of a particular sound
in mid-sequence. When the Record Live Changes feature is used
(accessed by pressing MIXER/EFFECTS, then 4), many of these
events are recorded into the active track to simulate a smooth and
continuous individual output/effects mixer volume change. There
are two fields:
Pad
1. The field:
This field determines which of the 64 pad numbers/mixer
sliders (A01-D16) this message affects.
Val
2. The field:
This field contains the actual mixer slider value (0-100).
• The Control Change event
>Control:C1-MODULATION WHEEL
There are two fields:
1. The C ontrol
WHEEL WHEEL WHEEL WHEEL WHEEL ):
There are 128 MIDI continuous controllers (0-127), each
with an assigned control function. The control function,
as defined in the MIDI 1.0 Detailed Specification, is
displayed to the right of the selected controller number.
Page 98
Pad:A01
C1-MODULATION C1-MODULATION
field ( Control:C1-MODULATION C1-MODULATION C1-MODULATION
Val:C
Val:127
Val:127