Akai MPC 3000 Operator's Manual page 78

TIMING CORECT
Press to duplicate the function of pressing TIMING COR-
RECT. This is very useful for hands-free use of the Note
Repeat function.
' + ':
Press to duplicate the function of turning the data entry
control one step to the right.
' - ':
Press to duplicate the function of turning the data entry
control one step to the left.
RECORD IN/OUT
Press once to duplicate the function of punching in to Record
mode while playing; press again to duplicate the function of
punching out of Record mode and back into Play mode.
OVRDUB IN/OUT
Press once to duplicate the function of punching in to
Overdub mode while playing; press again to duplicate the
function of punching out of Overdub mode and back into
Play mode.
<
' ':
Press to duplicate the function of pressing the REWIND [<]
key. This is very useful for stepping backward through the
sequence while Step Edit is on.
' > ':
Press to duplicate the function of pressing the FAST FOR-
WARD [>] key. This is very useful for stepping forward
through the sequence while Step Edit is on.
TAP TEMPO :
Press to duplicate the function of pressing the TAP TEMPO
key.
Free seq mem
• The
This field shows the total amount of sequence memory currently
available for recording. It is for display only and cannot be edited.
The soft keys:
<Init PAR>
• The soft key:
Pressing this soft key presents a screen used for initializing all
general system parameters, which are stored in PAR files. This
function is described in the following section of this chapter.
Page 65
Chapter 3: Recording Sequences
(Timing correct):
:
(Overdub in/out):
field: