Resetting Components; Resetting The Receiver - Shure GLXD6 Manual

Issue
Sound level variations when switching to dif­
ferent sources
Receiver/transmitter won't turn off
Receiver gain control cannot be adjusted
Receiver controls cannot be adjusted
Transmitter ID function does not respond
Transmitter information does not appear on
the Receiver LCD
Transmitter powers off after 1 hour
Model
SM58
BETA 58
SM86
BETA 87A

Resetting Components

Use the reset function if it is necessary to restore the transmitter or receiver to their factory settings.

Resetting the Receiver

Restores the receiver to the following factory settings:
• Gain level = default
• Controls = unlocked
Press and hold the link button while turning on the receiver power until the LCD displays RE.
Note: When reset is complete, the receiver will automatically initiate linking to search for a transmitter. Press and hold the transmitter link button within five
seconds of powering-on to complete the link.
Indicator Status
N/A
Transmitter LED flash­
ing rapidly
N/A
LK shown on receiver
display when buttons
are pressed
Transmitter LED flashes
green 3 times
N/A
Transmitter status LED
off
A
51 mm, 2.0 in.
51 mm, 2.0 in.
49 mm, 1.9 in.
51 mm, 2.0 in.
Solution
Adjust transmitter gain as necessary (see
Gain Adjustment).
Controls locked. See Locking and Unlocking
Controls.
Check transmitter. Transmitter must be on to
enable gain changes.
Controls locked. See Locking and Unlocking
Controls.
Controls locked. See Locking and Unlocking
Controls.
Linked transmitter is off or the receiver is not
linked to a transmitter.
GLX-D transmitters automatically power-off
after 1 hour to conserve battery life if the sig­
nal from a linked receiver is not detected.
Make sure that linked receiver is turned on.
B
252 mm, 9.9 in.
252 mm, 9.9 in.
252 mm, 9.9 in.
252 mm, 9.9 in.
Shure Incorporated
C
37 mm, 1.5 in.
37 mm, 1.5 in.
37 mm, 1.5 in.
37 mm, 1.5 in.
27/33