Sharps And Flats; Reference Pitch; Using The Tuner; Needle Mode - Shure GLXD6 Manual

* dot appears on the display as a reminder that the pedal is detuned.

Sharps and Flats

Adds sharp or flat symbols to the display of non-natural notes.

Reference Pitch

The reference pitch can be offset from standard A440 in a range of 432 Hz to 447 Hz in 1 Hz increments.
When adjusting the pitch, the last 2 digits of the value will be displayed. For example, "32" would appear on the display when
the pitch has been set to 432 Hz.
A dot appears on the display as a reminder that the reference pitch has been offset.

Using the Tuner

1. Press the footswitch to enter tuner mode.
2. Play each note individually. The display shows the name of the note.
3. Adjust tuning until both indicators illuminate and the needle or strobe indicate that tuning is correct.

Needle Mode

Both tuning indicators and the center green segment will illuminate when the note is in tune.
Shure Incorporated
22/33