Receiver Operation; Audio Gain Adjustment - Shure GLXD6 Manual

Group/Channel
2/3
2/4
2/5
Group 3: Channels 1-8 (latency = 7.3 ms)
Group/Channel
3/1
3/2
3/3
3/4
3/5
3/6
3/7
3/8
Group 4: Channel 1 (latency = 7.3 ms)
Group/Channel
4/1

Receiver Operation

Audio Gain Adjustment

Transmitter gain has an adjustment range from -20 dB to +40 dB, in 1 dB increments.
Tip: Try the 0 dB (unity gain) setting as a starting point, and then make gain adjustments if necessary.
1. Press and hold the mode button on the receiver until dB appears on the display.
2. Press the up/down arrows to adjust the gain. For faster adjustments, press and hold the buttons.
Note: The intensity of the green audio LED corresponds to the audio level. Rapid flashing indicates audio clipping. Reduce the gain to remove the overload.
Frequencies
2410 2411 2431 2432 2448 2449
2417 2418 2451 2452 2468 2469
2437 2438 2462 2463 2477 2478
Frequencies
2415 2416 2443
2422 2423 2439
2426 2427 2457
2447 2448 2468
2409 2451 2452
2431 2462 2463
2404 2473 2474
2435 2477 2478
Frequencies
2404 2405 2410 2411 2417 2418 2423 2424 2426 2427 2431 2432 2437
2438 2443 2444 2448 2449 2451 2452 2456 2457 2462 2463 2468 2469
2473 2474 2477 2478
Shure Incorporated
17/33