Transmitter Status Led; Wearing The Bodypack Transmitter; Batteries And Charging - Shure GLXD6 Manual

◦ Press momentarily to activate Remote ID function to a linked receiver
⑦ Battery Compartment
Holds Shure rechargeable battery.

Transmitter Status LED

LED is green during normal operation.
LED color or flashing indicates a change in transmitter status as shown in the following table:
Color
Green
Red
Red/Green
Amber

Wearing the Bodypack Transmitter

Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown.
For best results, the belt should be pressed against the base of the clip.

Batteries and Charging

GLX-D transmitters are powered by Shure SB902A lithium-ion rechargeable batteries. Advanced battery chemistry maximizes
runtimes with zero memory effects, eliminating the need to discharge batteries prior to charging.
When not in use, recommended battery storage temperature is 10°C (50°F) to 25°C (77°F).
Note: The transmitter will not pass RF or audio signals when connected to the charging cable.
State Status
Flashing (slow) transmitter attempting relink with receiver
Flashing (fast) unlinked transmitter searching for receiver
Flashes 3 times indicates locked transmitter when power switch is pressed
On battery life < 1 hour
Flashing battery life < 30 minutes
Flashing remote ID active
Flashing battery error, replace battery
Shure Incorporated
10/33