Overview Of Settings - Siemens Albatros 2 RVS13 Series User Manual

Legend
Time of day and date
1 E Hours/minutes
2 E Day/month
3 E Year
5 F Start of summertime
6 F End of summertime
Operator section
20 E Language
German ¦ ...
22 F Info
Temporarily ¦ Permanently
26 F Operation lock
Off
¦ On
27 F Programming lock
Off
¦ On
40 I Used as
Room unit 1 ¦ Room unit 2 ¦ Operator unit ¦Service unit
42 I Assignment room unit 1
Heating circuit 1 ¦ Heating circuits 1 and 2
44 I Operation HC2
Commonly with HC1 ¦ Independently
46 I Operation HCP
Commonly with HC1 ¦ Independently
48 I Action occupancy button
None ¦ Heating circuit 1 ¦ Heating circuit 2 ¦ Commonly
54 F Readjustment room sensor
70 F Software version
wireless
120 I Binding
No ¦ Yes
121 I Test mode
Off
¦ On
130 I Room unit 1
Missing ¦ Ready ¦ No reception ¦ Change batt
131 I Room unit 2
Missing ¦ Ready ¦ No reception ¦ Change batt
132 I Outside sensor
Missing ¦ Ready ¦ No reception ¦ Change batt
133 I Repeater
Missing ¦ Ready ¦ No reception
134 I Operator unit
Missing ¦ Ready ¦ No reception ¦ Change batt
135 I Service unit
Missing ¦ Ready ¦ No reception ¦ Change batt
Siemens
Building Technologies
5.1.4

Overview of settings

The table below shows all available settings up to the heating engineer level. However,
certain operating lines may be hidden, depending on the type of unit.
E = enduser I = commissioning
ZN = line number
User Manual
5 Handling
F = heating engineer
- 00:00
- 01.01
- 2004
25.03 01.01
25.10 01.01
German
Temporarily
Off
Off
Room unit 1
Heating circuit 1
Commonly with HC1
Commonly with HC1
Heating circuit 1
0.0 -3
- 0
No
Off
-
-
-
-
-
-
23:59 hh:mm
31.12 tt.MM
2099 jjjj
31.12 tt.MM
31.12 tt.MM
-
-
-
-
-
-
-
-
-
3 °C
99.9 -
-
-
-
-
-
-
CE1U2357en
2014-07-30
41/109