Planning
Mounting method
Connections
20/109
Siemens
Building Technologies
3.6 Room unit QAA75.61x
The room unit should be located in the main living room while giving consideration to
the following points:
· The place of installation should be chosen such that the sensor can capture the room
temperature as accurately as possible without getting adversely affected by direct
solar radiation or other heat or refrigeration sources (about 1.5 meters above the
floor)
· In the case of wall mounting, there must be sufficient clearance above the unit,
enabling it to be fitted and removed
When the unit is removed from its base, power is disconnected so that the unit is out of
operation.
Terminal
Marking
1
CL+
2
CL-
3
G+
User Manual
3 Mounting and installation
QAA75.610
BSB data
BSB ground
Reserved
QAA75.611
BSB data
BSB ground
Power supply DC 12 V
CE1U2357en
2014-07-30