Audio Output Setting - Aiwa HT-DV1 Operating Instructions Manual

Audio Output Setting

Set the audio output of the system according to the type of
other external audio equipment connected to the system.
• When connecting other external audio equipment to the
AUDIO OUT L/R jacks of the DVD player, you need to
set "Downmix Type" only.
• When connecting an external AV receiver not equipped
with Dolby Digital decoder or DTS decoder to the
DIGITAL OUT (OPTICAL) jack of the DVD player, you
need not make any settings.
• When playing DVDs with Dolby Digital or DTS Digital
Surround sound on an external AV receiver equipped
with Dolby Digital decoder and/or DTS decoder, set
"Digital Stream" or "dts Output" as follows:
- When playing DVDs with Dolby Digital sound
Digital Stream: DOLBY DIGITAL
- When playing DVDs with DTS Digital Surround sound
dts Output: ON
CAUTION
When connecting an external AV receiver not equipped
with Dolby Digital decoder or DTS decoder using an
optical cord, DO NOT set "Digital Stream" to "DOLBY
DIGITAL" or "dts Output" to "ON".
Otherwise, merely attempting to play a disc may cause
a screeching noise that could be harmful to your ears
and damage the speakers.
Digital Stream:
Select the digital audio signal to be output from the DIGITAL
OUT (OPTICAL) jack of the DVD player.
1 In the SETUP MENU, press i/k repeatedly to
select "Audio Output Setting", then press ENTER.
SETUP MENU
Choose The Item ik
On-Screen Menu
Disc Languages
Audio Output Setting
TV Aspect
Ratings
ENTER : Choose item SETUP : Completion
2 Press i/k repeatedly to select "Digital Stream".
Audio Output Setting
Choose The Item ik
Digital Stream
dts Output
Downmix Type
Speaker Setting
Test Sound
ENTER : Choose item RETURN : Previous menu
SETUP : Completion
3 Press ENTER to select the appropriate setting.
Each time the button is pressed, the setting toggles
between "Downmix PCM" and "DOLBY DIGITAL".
Downmix PCM
Select this option if the system is connected to an
external AV receiver which is not equipped with a Dolby
Digital decoder.
DOLBY DIGITAL
Select this option if the system is connected to an
external AV receiver which is equipped with a Dolby
Digital decoder.
4 Press vRETURN to return to the previous menu
screen or press SETUP to exit the setup menu.
dts Output:
Set the dts output according to whether the connected
external AV receiver is equipped with a DTS decoder or
not.
1 In the SETUP MENU, press i/k repeatedly to
select "Audio Output Setting", then press ENTER.
2 Press i/k repeatedly to select "dts Output".
Audio Output Setting
Choose The Item ik
Digital Stream
dts Output
Downmix Type
Speaker Setting
Test Sound
ENTER : Choose item RETURN : Previous menu
SETUP : Completion
CONTINUE
DOLBY DIGITAL
OFF
Stereo
OFF
Downmix PCM
ON
Stereo
OFF
47
ENGLISH
En