Connecting The Ac Power Cord - Aiwa HT-DV1 Operating Instructions Manual

Connecting the other speakers
Connect the other speakers in the same way with the right
front speaker.
Use the correct speaker cord with the tape color matching
each speaker.
Make sure that the speaker cords with white stripes go to
the 0 terminals.
NOTES
• Use the supplied speakers only.
• As far as possible, install the speakers at the same
distance from the listening position.
• Install the center speaker as close as possible to midway
between the left and right front speakers.
• Install the left and right surround speakers no farther
than the left and right front speakers from the listening
position.

4 Connecting the AC power cord

Rear of the DVD player
To the AC INPUT connector
To the AC outlet
AC power cord (supplied)
The POWER/6STANDBY indicator lights up red and the
system enters power-off standby mode, when the AC power
cord is connected to the AC outlet.
Rear of the amplifier
15
ENGLISH
En