Dubbing A Tape; Setting The Clock - Aiwa CA-DW635 Operating Instructions Manual

CLOCK
TIMER
DUBBING A TAPE SETTING THE CLOCK
• Use Type I (normal) tapes only.
1 Press TAPE.
2
Insert a tape to be recorded on into deck 1 with
the side to be recorded on facing out.
3
Insert a tape to be played into deck 2 with the
side to be played facing out.
4
Press II PAUSE then press • REC on deck 1
to enter recording pause mode.
► PLAY is pressed simultaneously.
5 Press DUB SPEED to select a dubbing speed.
HI-DUB is displayed: Dubs at high speed.
HI-DUB is not displayed: Dubs at normal speed.
6 Press ► PLAY on deck 2.
II PAUSE on deck 1 is released and recording starts.
To stop recording, press U/± STOP/EJECT on deck 1.
RM -)'c(eo
2
Press « DOWN or ►*- UP to designate the
hour.
it Press 11 SET to set the hour.
4
Press -** DOWN or ►► UP to designate the
minute.
5
Press II SET to set the minute and complete
D
ENGLISH 13