Table of Contents
Advertisement
Protocol
Port Range
Add
After you finish with all settings, please click "Apply" button.
If you want to reset all settings in this page, please click "Cancel" button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click "Continue" to back to previous setup page to continue on other setup procedures,
or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.4.2 URL Filtering
You can block access to some Websites or web contents from local PCs by entering a full URL address
or just keyword of the Web site. This filter can help parents to manage the Internet usage for their children
(i.e. Parental Control).
If the service you need is not listed above, you can create a new
service on your own. Please select TCP or UDP, if you're not
sure, please select "Both".
Please input the port range of new service here. If you want to
specify port 80 to 90, please input "80-90"; if you want to apply
this rule on a single port, just input the port number, such as 80.
When you finish with all settings, please click "Add" to save
settings, you'll be brought back to previous menu, and the rule
you just set will appear in current IP filtering table.
62
Advertisement
Table of Contents
