Table of Contents
Advertisement
Parameter
Enable URL Filtering
URL/Keyword
Current URL Blocking Table
Delete
Delete All
Reset
After you finish with all settings, please click "Apply" button.
If you want to reset all settings in this page, please click "Cancel" button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click "Continue" to back to previous setup page to continue on other setup procedures,
or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
Description
Enable/Disable URL Blocking.
You can enter the full URL address of a website or any
keyword of certain web contents you want to block.
From the table, you can check each URL filter setting.
If you want to delete a setting, check the 'select' box of the
setting you want to delete, then click 'Delete Selected' button.
(You can select more than one setting).
If you want to delete all settings listed here, please click 'Delete
All' button.
You can also click 'Reset' button to unselect all.
63
Advertisement
Table of Contents
