Advertisement
Quick Links
Download this manual
See also:
User Manual
Quick Installation Guide
Wireless N 300 Green Router
Model # AR685W
Ver. 1A
Package Contents
Before you begin the installation, please check the items of your package:
•
Wireless N 300 Green Router
•
Power Adapter
•
Ethernet Cable (Cat.5)
•
Setup CD
•
Quick Installation Guide
Section 1
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User's Manual on the
supplied CD.
Installing the Router
Step 1
Insert the Setup CD into your CD-ROM drive.
Advertisement
Related Manuals for Airlink101 AR685W
Summary of Contents for Airlink101 AR685W
-
Page 1: Quick Installation Guide
Quick Installation Guide Wireless N 300 Green Router Model # AR685W Ver. 1A Package Contents Before you begin the installation, please check the items of your package: • Wireless N 300 Green Router • Power Adapter • Ethernet Cable (Cat.5) •... - Page 2 Step 2 Click Next to start the configuration. Step 3 Connect one end of a network cable to the WAN port of the router and connect the other end to your DSL/Cable modem. Step 4 Connect one end of another network cable to the LAN port of the router and connect the other end to your computer.
- Page 3 Step 6 Make sure the LEDs of POWER, WAN, WLAN, and the LAN port that the computer is connected to are lit. If not, try the above steps again. LED Indicators: Light Description Status POWER Router is powered on. WPS setup is in progress. WLAN Wireless network is switched off.
- Page 4 Step 9 Enter the settings for your Internet Connection Type. Dynamic IP (Cable Modem users) Click on Clone to clone the MAC address of your PC to the modem then click Next. PPPoE (DSL users) Enter the user name and password provided by your ISP then click Next. Step 10 Please wait while the Wizard trying to connect to the Internet.
-
Page 5: Connecting To The Router Wirelessly
Step 12 Configure the security key for your wireless network. Check Enable WPA / WPA2 (AES). Enter 8 to 63 characters into Pre-Share Key. Click Next. This will enable WPA/WPA2-AES security mode for your wireless router. Please make sure that all your computers on the wireless network support this mode. -
Page 6: Technical Support
Step 2 Enter the network security key if the wireless network you are attempting to connect to has wireless encryption enabled. Click OK. The connection should be now established. Section 3 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com *Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications.