Table of Contents
Advertisement
PIN Code
APN
User Name
Password
Verify Password
Service
AT Dial Script
Cable
Click on Cable Modem if you are connecting to Internet through a cable modem.
When the Dynamic IP settings come up, click "Clone MAC" button and click NEXT.
Parameter
Host Name
MAC Address
Please input Pin Code for your UMTS or HSDPA or EVDO
connection, this is optional, and only required if your service
provider asks you to do so.
Please input the APN code assigned by your Internet service
provider here.
Please input user name assigned by your Internet service
provider here.
Please input password assigned by your Internet service
provider here.
Please input password again for confirmation.
Please select your service type between CDMA2000 or 3G/3.5G
Only. You may try both service types if you are not sure which
one your USB modem card uses.
Please input Dialed Number for your UMTS or HSDPA
connection, the default is *99#. This field should not be altered
except when required by your service provider.
Description
Please input the host name of your computer, this is optional,
and only required if your service provider asks you to do so.
Please input MAC address of your computer here, if your service
provider only permits computer with certain MAC address to
access internet. If you are using the computer which used to
connect to Internet via cable modem, you can simply press
"Clone Mac address" button to fill the MAC address field with the
MAC address of your computer.
14
Advertisement
Table of Contents
