Mac Filtering - Airlink101 AR686WV2 User Manual

D. Client
Client mode takes the signal from an existing network and routes it to a single
device on the LAN. This application is good if you have a computer or device that
does not have wireless capabilities or if the devices internal wireless card is not
strong enough for your purposes. Setup is very similar to Repeater and WDS mode
with the difference being that the AR686WV2 will NOT repeat the wireless signal
from the existing network. This is similar to Bridge mode, with the difference being
that Client mode will only output signal to a single device on the LAN.
Please see section 3.3.1.1 B for instructions on how to setup Client mode.

3.3.2 MAC Filtering

MAC Filtering allows you to control who can connect to your wireless network. Every
wireless device has its own unique MAC address. With MAC filtering you can choose
who can or who cannot join your network.
33