Table of Contents
Advertisement
Parameters
Delete
Delete All
Enable MAC Control
MAC Address
Comment
Add
Clear
Reset
After you finish with all settings, please click "Apply" button.
If you want to reset all settings in this page, please click "Cancel" button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click "Continue" to back to previous setup page to continue on other setup procedures,
or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.2.4 Advanced Settings
You can set advanced wireless LAN parameters of this router. The parameters include
Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble Type, etc.
It is suggested not to change these parameters unless you know what effect the changes will
have on this router.
Description
If you want to delete a specific MAC address entry,
check the 'select' box of the MAC address you want to
delete, then click 'Delete' button. (You can select more
than one MAC addresses).
If you want to delete all MAC addresses listed here,
please click 'Delete All' button.
Check/Uncheck to enable/disable wireless MAC control.
Input the MAC address of your wireless devices here,
format 'xx:xx:xx:xx:xx:xx'.
You can input any text here as the comment of this MAC
address, like 'ROOM 2A Computer' or anything.
Click "Add" button to add the MAC address and
associated comment to the MAC address filtering table.
Click "Clear" to remove the value you inputted in MAC
address and comment field.
You can also click 'Reset' button to unselect all.
42
Advertisement
Table of Contents
