Table of Contents
Advertisement
Parameters
Enable DMZ
Public IP
Client PC IP address
Computer Name
Add
Reset
Current DMZ table
Delete
Delete All
Description
Check/uncheck to enable/disable DMZ.
You can select "Dynamic IP" or "Static IP" here. If you select "Dynamic
IP", you have to select an Internet connection session from drop down
menu; if you select "Static IP", please input the IP address that you want
to map to a specific private IP address.
Please input the private IP address that the Internet IP address will be
mapped to.
Pull down the menu and all the computers connected to the router will be
listed here. You can easily to select the computer name without checking
the IP address of the computer. If you do not see any computer after you
click on the drop-down menu, select the option "Refresh" and you will be
given a list of computers that are connected to your network.
Click "Add" button to add the public IP address and associated private IP
address to the DMZ table.
Click "Reset" to remove the value you inputted in Public IP address and
Client PC IP address field.
All existing public IP address and private IP address mapping will be
displayed here.
If you want to delete a specific DMZ entry, check the "Select"‟ box of the
DMZ entry you want to delete, then click "Delete"‟ button. (You can
select more than one DMZ entries).
If you want to delete all DMZ entries listed here, please click "Delete All‟"
button.
52
Advertisement
Table of Contents
