If you use DSL and you see all 0's, click on the Connect button.
Step 3
Once you clicked the Renew or Connect button, you should see some numbers under
WAN Status. This means you have successfully established Internet connection.
Note: If you still see all 0's after clicking on the Renew or Connect button, try the tips in Section 6,
Troubleshooting.
Section 5
Connecting to the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless network adapter to
the same settings in order to establish a wireless connection with the router. Please refer to your wireless
network adapter's manual on how to configure these settings.
SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Channel #: 11
WEP: disabled
You may need to restart your computer after establishing a signal strength/link quality with the router.
For information on how to configure wireless security, please refer to the User's Manual on the provided
CD.