Table of Contents
Advertisement
Step 5
Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x is
a number between 2 - 254). Proceed to Section 3, Configure the Router. If you don't get an IP
address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is
ON and try ipconfig/renew again.
Step 6
For Windows 95/98/ME go to Start, Run, type winipcfg and click OK. Windows 2000/XP/Vista
users can skip this step and move ahead to Section 3
Step 7
Select your network card from the drop-down menu and click Release.
Advertisement
Table of Contents
