Table of Contents
Advertisement
For Cable Modem and DSL Users
Step 1
Power off the Cable/DSL modem, router, and computer and wait for 5 minutes.
Step 2
Turn on the Cable/DSL modem and wait for the lights on the modem to settle down.
Step 3
Turn on the router and wait for the lights on the router to settle down.
Step 4
Turn on the computer.
Step 5
Redo the Setup Wizard.
Step 6
Verify the Connection Status as described in Section 4.
Section 6
Section 7
*Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, mix of wireless products used, radio frequency
interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual data throughput rate.
Copyright © 2007 AirLink101
and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101
other product or service names are the property of their respective holders. AirLink101
patents and pending applications, mask work rights, and copyrights.
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
®
. All rights reserved. AirLink101
®
®
, the stylized AirLink101
logo, specific product designations, and all other words
®
products are protected under numerous U.S. and foreign
®
. All
Advertisement
Table of Contents
