Advertisement
Step 12
Configure the security key for your wireless network. Check Enable
WPA Pre-Share Key. Enter 8 to 63 characters into WPA-Pre-Share Key.
Click Next.
Step 13
Verify the settings you just configured for the Router. Click Finish
to restart the Router.
Congratulations! Your router configuration has been finished.
Section 2
Connecting to the Router Wirelessly
You must configure your wireless computer in order to establish a wireless
connection to the router. In this section, you can find the instructions of how
to connect to the router wirelessly with your Vista computer. You can also
refer to the manual of your wireless network card regarding how to connect
to a router wirelessly.
Step 1
Click on this icon
on the task bar of your desktop, then click on
Wireless networks are available.
Advertisement
