Table of Contents
Advertisement
Section 6
For 3G Mobile Card Users Only
Contact your internet service provider to make sure that you are in an area that allows you to receive a
3G signal.
Also test your 3G card in a computer to make sure that the 3G card works properly and is receiving a
useable signal.
Make sure that the card is properly inserted in the router and detected by the router correctly, you can see
the 3G card information in the 3G Status under System Status Page. Verify that all the lights on the 3G
card that should be lit are lit.
For Cable Modem Users Only
Step 1
Go to the router's Setup Wizard.
Step 2
At the Cable Modem setting (Dynamic IP Address), click on the Clone MAC button and click
Next.
Step 3
Proceed through the rest of the setup.
Step 4
Verify the Connection Status as described in Section 4.
For DSL Users Only
Step 1
Go to the router's Setup Wizard.
Step 2
At the PPPoE setting, double-check the spelling of your Account name and Password. Some
ISPs require you to include the domain name along with your account name in the Account Name field.
Example:
Step 3
Complete the Setup Wizard and verify the Connection Status as described in Section 4.
Troubleshooting
username@sbcglobal.net
Advertisement
Table of Contents
