4.23 Antenna Port Plug
4.23.1 Antenna Port Plug Removal
•
No Disassembly required
1. Remove the antenna port plug using a dental
pick.
NOTE!
NOTE!
4.23.2 Antenna Port Plug Installation
NOTE!
1. Obtain a new antenna port plug and push it into
the antenna port cavity in the antenna cover.
•
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB
Be careful to not damage the antenna
cover.
Do not insert the dental pick too far
or it will hit the circuit board and
damage it.
The port plug is keyed and must be
inserted as shown so that the key tab
goes into the key slot.
No reassembly required.
Step-by-Step Instructions
Step-by-Step Instructions
Working Instruction, Mechanical
71(74)