Label Installation - Sony Ericsson K800 Working Instruction, Mechanical

4.2.2 Label Installation

NOTE!
1. If a new label has not been created yet, then do
so at this time.
NOTE!
2. Locate the rectangular recessed area indicated
3. Place the edge of the label that mounts closest
to the battery connection in the recessed area
first.
4. Then roll the rest of the label down into the
recess area on the floor of the battery cavity.
5. Once the label is correctly positioned, carefully
smooth the label into place.
•
Perform section 3.7 - 3.9 of the reassembly procedure
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
No more than two labels are allowed
stacked on top of each other. If there
are already two labels on the phone,
perform the label removal procedure
before continuing.
Be very careful not to contact the
battery contacts with the sticky side
of the label.
Working Instruction, Mechanical
33(74)