Placement Of The Lcd And Keypad Assemblies - Sony Ericsson K800 Working Instruction, Mechanical

3.4
1. Rotate the LCD assembly down onto the circuit
board so that the LCD flex film folds underneath
the LCD assembly as shown.
2. Verify that a conductive cylinder is located in the
hole in the LCD holder indicated.
3. Position the LCD to the circuit board so that the
conductive cylinder is aligned with its
corresponding conductive pad on the circuit
board.
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB

Placement of the LCD and Keypad Assemblies

Step-by-Step Instructions
Working Instruction, Mechanical
21(74)