HP ENVY x360 15m Maintenance And Service Manual page 53

7. Remove the seven Phillips M2.5 × 4.9 screws that secure the display assembly to the top cover/keyboard.
8. Swing the top edge of the display assembly (1) away from the top cover/keyboard.
9. Separate the display assembly (2) from the top cover/keyboard.
10. If it is necessary to replace the display panel assembly or any of the internal display components, follow
these steps:
a. Position the display assembly with the panel facing up.
b. Attach two suction cups (1) to the display assembly as shown in the following illustration.
39.6 cm (15.6 in) display assembly 47