Processor Fan - HP ENVY x360 15m Maintenance And Service Manual

4. Remove the infrared sensor board (4) and cable.
Reverse this procedure to install the infrared sensor board.

Processor fan

To remove the processor fan, use these procedures and illustrations.
Table 5-8 Fan description and part number
Description
Fan (includes cable)
Before removing the processor fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the processor fan:
1. Disconnect the processor fan cable (1) from the system board.
2. Remove the three Phillips M2.0 × 3.7 screws (2) that secure the processor fan to the computer.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 29).
29).
Battery on page 31).
Spare part number
M45465-001