Caring For Wood Veneer (Select Products Only) - HP ENVY x360 15m Maintenance And Service Manual

solution consisting of 70% isopropyl alcohol and 30% water. This solution is also known as rubbing alcohol and is
sold in most stores.
Follow these steps when disinfecting high-touch, external surfaces on your computer:
1. Wear disposable gloves made of latex (or nitrile gloves, if you are latex-sensitive) when cleaning the
surfaces.
2. Turn off your device and unplug the power cord and other connected external devices. Remove any installed
batteries from items such as wireless keyboards.
CAUTION:
or plugged in.
3. Moisten a microfiber cloth with a mixture of 70% isopropyl alcohol and 30% water. The cloth should be
moist, but not dripping wet.
CAUTION:
based surface cleaners: bleach, peroxides (including hydrogen peroxide), acetone, ammonia, ethyl alcohol,
methylene chloride, or any petroleum-based materials, such as gasoline, paint thinner, benzene, or toluene.
IMPORTANT:
4. Wipe the exterior of the product gently with the moistened cloth.
IMPORTANT:
its way inside your HP product, it can cause damage to the product. Do not spray liquids directly on the
product. Do not use aerosol sprays, solvents, abrasives, or cleaners containing hydrogen peroxide or bleach
that might damage the finish.
5. Start with the display (if applicable). Wipe carefully in one direction, and move from the top of the display to
the bottom. Finish with any flexible cables, like power cord, keyboard cable, and USB cables.
6. Be sure that surfaces have completely air-dried before turning the device on after cleaning.
7. Discard the gloves after each cleaning. Clean your hands immediately after you remove the gloves.

Caring for wood veneer (select products only)

Your product might feature high-quality wood veneer. As with all natural wood products, proper care is important
for best results over the life of the product. Because of the nature of natural wood, you might see unique
variations in the grain pattern or subtle variations in color, which are normal.
Clean the wood with a dry, static-free microfiber cloth or chamois.
●
Avoid cleaning products containing substances such as ammonia, methylene chloride, acetone, turpentine,
●
or other petroleum-based solvents.
Do not expose the wood to sun or moisture for long periods of time.
●
If the wood becomes wet, dry it by dabbing with an absorbent, lint-free cloth.
●
Avoid contact with any substance that might dye or discolor the wood.
●
Avoid contact with sharp objects or rough surfaces that might scratch the wood.
●
See Removing dirt and debris from your computer on page 24
high-touch, external surfaces on your computer. After you remove the dirt and debris, you can also clean the
To prevent electric shock or damage to components, never clean a product while it is turned on
Do not use any of the following chemicals or any solutions that contain them, including spray-
To avoid damaging the surface, avoid abrasive cloths, towels, and paper towels.
Keep liquids away from the product. Avoid getting moisture in any openings. If liquid makes
for the recommended steps to clean the
Caring for wood veneer (select products only) 25