Lexmark CX331 User Manual page 32

Set up, install, and configure
Notes:
•
Depending on your e-mail service provider, type your account password, app password, or
authentication password. For more information on the password, see the list of
providers, and then look for Device Password.
•
If your provider is not listed, then contact your provider and ask for the Primary SMTP Gateway,
Primary SMTP Gateway Port, Use SSL/TLS, and SMTP Server Authentication settings.
4
Touch OK.
Using the Settings menu in the printer
1
From the home screen, touch Settings > E‑mail > E‑mail Setup.
2
Configure the settings.
Notes:
•
For more information on the password, see the list of
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > E‑mail.
3
From the E‑mail Setup section, configure the settings.
Notes:
•
For more information on the password, see the list of
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
4
Click Save.
Use the following table to determine the SMTP settings of your e‑mail service provider.
TM
Gmail
Note: Make sure that two‑step verification is enabled on your Google account. To enable two‑step
verification, go to the
Google" section, click 2‑Step Verification.
Setting
Primary SMTP Gateway
Primary SMTP Gateway Port 587
Use SSL/TLS
Require Trusted Certificate
Google Account Security
Value
smtp.gmail.com
Required
Disabled
e‑mail service
e‑mail service
page, log in to your account, and then from the "Signing in to
e‑mail service
providers.
providers.
32