Lexmark CX331 User Manual page 109

Use printer menus
Menu item
Sides
Off*
Short Edge
Long Edge
File Name
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu item
Color Balance
Cyan to Red
-4 to 4 (0*)
Magenta to Green
-4 to 4 (0*)
Yellow to Blue
-4 to 4 (0*)
Auto Color Detect
Color Sensitivity
1–9 (5*)
Area Sensitivity
1–9 (5*)
Scan Bit Depth
1 bit*
8 bit
Minimum Scan Resolution
75 dpi
150 dpi
200 dpi
300 dpi*
Contrast
Best for content*
0
1
2
3
4
5
Background Removal
Level
‑4 to 4 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the orientation of the original document when scanning on both sides
of the document.
Note: This menu item appears only in some printer models.
Specify the file name of the scanned image.
Description
Adjust the color intensity during scanning.
Set the amount of color that the printer detects from the original document.
Specify the contrast of the output.
Adjust the amount of background visible on a scanned image.
109