Advertisement
5.8
Boom Microphone Removal and Replacement
a. Removal
1. Using cross-tipped screwdriver loosen three captive screws (3) securing
2. Unplug the 3-pin connector connecting the boom microphone to the cable
3. Remove the e-ring securing the boom microphone in place and remove and
Framingham, MA 01701-9168
cable/microphone assembly (2) to earcup assembly (1).
connecting the cable/microphone assembly (2) to the jumper cable coming off
the earcup printed circuit board and remove the cable/microphone assembly.
assembly.
discard the boom microphone.
SIZE
FSCM
A
32108
CLASS
DWG NO.
RF
273139
Unplug connector
NOTE
Remove o-rings with
microphone assembly.
O-rings may remain in
barrel when
microphone assembly
is removed.
SHEET
18 of 25
REV.
01D
Advertisement
