Advertisement
5.6
Alkaline Battery Removal and Replacement
a. TTH Battery Removal and Replacement
1. Using flat-tipped screwdriver, loosen the captive screw on the battery cover and
2. Remove old battery and insert replacement battery positive end first into the
3. Close battery cover and tighten screw using flat-tipped screwdriver.
Control Module
b. TTH Series 2 Battery Removal and Replacement
1. Using flat-tipped screwdriver, loosen the captive screw on the battery cover and
2. Remove old battery and insert replacement battery positive end first into the
3. Close battery cover by inserting the tab on the battery cover into the slot in the
4. Tighten screw using flat-tipped screwdriver.
Observe Polarity
Captive screw on
battery cover
Framingham, MA 01701-9168
rotate to open the battery compartment.
battery compartment.
rotate to open the battery compartment. Battery door is connected to the control
module via a stainless steel tether.
battery compartment.
control module and rotating the battery cover closed.
SIZE
FSCM
A
32108
+
-
+
-
CLASS
DWG NO.
RF
273139
Captive screw on
battery cover
Observe Polarity
Control Module
SHEET
15 of 25
REV.
01D
Advertisement
