Advertisement
5.3
Windscreen and O-ring Removal and Replacement
a. Removal
1. Grasp O-ring (2) between thumb and forefinger and slide O-ring (2) and
2. Separate O-ring (2) from windscreen (3).
When placing windscreen/O-ring on microphone, be careful not to tear windscreen.
b. Replacement
1. Compress closed end of windscreen (3) and place inside O-ring (2) until O-ring is
2. Slide O-ring (2) with windscreen (3) onto microphone (1) and adjust O-ring until
Framingham, MA 01701-9168
Figure 4.3 Windscreens and O-ring Removal and Replacement
windscreen (3) off microphone (1).
midway on windscreen.
windscreen is secured.
SIZE
FSCM
A
32108
CAUTION
CLASS
DWG NO.
RF
273139
SHEET
REV.
12 of 25
01D
Advertisement
