Advertisement
5.5
Cable/Microphone Assembly Removal and Replacement
a. Removal
1. Using cross-tipped screwdriver loosen three captive screws (3) securing
b. Replacement
1. Plug cable connector from the cable/microphone assembly (2) into the jumper
CAUTION
Ensure no wires are pinched
during reassembly of the
cable/microphone assembly to
the earcup assembly.
2. Using cross-tipped screwdriver, secure cable/microphone assembly (2) to the
Framingham, MA 01701-9168
cable/microphone assembly (2) to earcup assembly (1).
connecting the cable/microphone assembly (2) to the jumper cable coming off
the earcup printed circuit board and remove the cable/microphone assembly.
cable (4) coming off the earcup printed circuit board.
earcup assembly (1).
SIZE
FSCM
A
32108
CLASS
DWG NO.
RF
273139
Unplug connector
SHEET
REV.
14 of 25
01D
Advertisement
