Cleaning Your Appliance; Manual Mode - Moulinex cuisine companion HF800A Manual

CLEANING YOUR APPLIANCE

MANUAL MODE

1-Press directly
selector representing the
parameter you have chosen
to adjust, i.e. the speed
selector (B2) or the cooking
temperature selector (B3)
or the time selector (B4),
the chosen parameter
flashes on the screen (C1-
C2-C3).
2- Then adjust the setting(s)
using the +/- selector
(B6). For safety reasons, it
is not possible to set a
temperature
setting a cooking time.
3- When you have finished
entering all
parameters, press
"start" button (B7). When
your appliance is using
cooking mode, the red
indicator light (B3) lights
up to inform you that
cooking has started. When
the programme
started, you have
possibility of stopping the
appliance at any time by
pressing the
button.
• The appliance should not be immersed.
Never put the motor unit (A) under running
water.
Once you have finished using it, disconnect
the appliance.
• Clean the bowl immediately after use.
• Press the locks (D2) then lift the bowl
assembly (D).
• Place the bowl on a flat surface.
• Unlock the lid by rotating one quarter of a
turn clockwise. Carefully remove the lid.
• When the parts have cooled, unclip the seal
holder from the lid with help of the spatula
(G) (See Fig. 15).
• Take care with the knives
ultrablade knife (F1) and the kneading /
EN
on the The programme is then in pause mode and
you
have the possibility of restarting by pressing
"start" again. If you have chosen the wrong
programme and if you want to cancel it, press
and hold the "stop" button for 2 seconds.
4- When the programme has ended, the
appliance emits 3 beeps.
5- Press the locks (D2) and then remove the
bowl assembly (D) (See Fig. 12).
Turbo / Pulse functions
1- Use the control panel (B) to directly access
without
the "turbo" and "pulse" functions (B5). To
use in turbo mode (maximum speed in
direct access), simply press and hold the
"turbo" selector. The LCD screen then
your
displays the time in use (C3) to help you.
the
To use the pulse (intermittent operation),
activate and stop the function by simply
pressing the "pulse" selector. Here too, the
LCD screen helps you by indicating the
time in use. When the function has started
up, you have the possibility of stopping the
appliance at any time by pressing the
has
"stop" button. The function is then in
the
pause mode, you have the possibility of
restarting by pressing the "start" button
again.
"stop"
crushing knife (F4) when you are cleaning
them and when you empty the bowl, they
are extremely sharp.
• When the parts have cooled down:
- dismantle the common spindle (D3), the seal
(D4) and the locking ring (D5) (See Fig. 13).
- clean the bowl (D), the common spindle
(D3), the seal (D4), the locking ring (D5),
the accessories (F1), (F2), (F3), (F4), (F5),
the steam regulator cap (E1), the lid (E2),
the seal holder (E3) and the seal (E4)
using a sponge and some soapy water.
• Rinse these different parts under running
water.
of the • For baked-on food, let the bowl soak for
several hours in water and dishwashing
12
IMPORTANT - 'MAKING YOUR APPLIANCE SECURE' INSTRUCTIONS ( 'SECU' )
detergent and scrape, if necessary, with a
spatula (G) or with the abrasive side of a
sponge.
• If there is a build up of limescale in the bowl,
use a damp sponge and, if necessary, white
vinegar.
• To clean the motor unit (A), use a damp
cloth. Dry carefully.
• To help you with cleaning, the bowl, lid
assembly and accessories are dishwasher
safe, with the exception of the common
spindle
(D3 and D4) and its locking ring (D5) (See
Fig. 14).
Your appliance
equipped, as standard,
with electronic motor
protection to guarantee
its longevity.
electronic security
safeguards against
incorrect use; in this
way, the motor is properly protected.
In cases of extreme use which disregard the
recommendations in the instructions (see
paragraph 'FIRST USE': potentially excessively
large quantities and/or abnormally long use
and/or preparing different recipes at short
intervals), the electronic protection will be
triggered to preserve the motor; in this case,
the appliance will stop functioning and the
message 'SECU' will be displayed on the LCD
screen of the control panel to indicate that the
appliance is temporarily out of service.
If 'SECU' is displayed on the control panel
and your appliance stops working, proceed
accordingly:
• Leave your appliance plugged in, do not
press the '0/1' switch.
• Please refer to the recommendations in the
instructions and readapt your use of the
appliance (see paragraph 'FIRST USE':
amount of ingredients/recipe preparation
time/temperature/type of accessories).
• The accessories, the detachable common
spindle and the parts of the lid may become
slightly discoloured with certain ingredients
such as curry, carrot juice, etc; this does not
represent any danger for your health or for
the operation of your appliance. To avoid
this, clean these parts immediately after use.
• Before using your bowl set (D), make sure
that the electrical contacts under the bowl
are clean and dry.
is • Allow the motor to cool down for half an
hour.
• Restart the appliance by clicking on the
'Start /Stop/Reset' button for two seconds
This (see B7 in the instructions).
Your appliance is now ready to be used again.
For further information, customer service de-
partment is at your disposal (see details in the
guarantee booklet).
13
EN