Technical Data - GEM 543 eSyStep Operating Instructions Manual

7 Technical data

7.1 Medium
Working medium:
Max. permissible viscos-
ity:
7.2 Temperature
Media temperature:
Ambient temperature:
7.3 Pressure
Operating pressure:
Leakage rate:
www.gemu-group.com
Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and
chemical properties of the body and seal material.
600 mm²/s (cSt)
Other versions for lower/higher temperatures and higher viscosities on request.
META-Daten fehlen — to META-Daten fehlen °F
0 to 60 °C*
* depending on version and/or operating parameters (see chapter Duty cycle and service life)
DN Actuator version
0A
6 -
8
10 -
15 15
20 10
25 6
32 -
40 -
50 -
Pressures in bar
All pressures are gauge pressures.
For max. operating pressures the pressure / temperature correlation must be observed.
Higher operating pressures on request
Control valve
Seat seal Standard
Metal DIN EN 60534-4
PTFE, FKM, EPDM DIN EN 60534-4
Actuator version
0E
25
25
25
25
-
-
-
-
-
Test procedure
1
1
9 / 69
7 Technical data
Actuator version
1A
Open/Close Control valve
valve code S0)
(code A0)
- -
- -
- -
25 25
25 15
23 10
15 6,5
9 4
6 1
Leakage rate Test medium
IV Air
VI Air
GEMÜ 543 eSyStep
Positioner (Code S0)