ActionTec R1020S(U) User Manual page 6

3. In the Network window under the configuration tab select TCP/IP. Click
Properties. If there is not a listing for TCP/IP, then refer to Appendix B for instal-
lation instructions now. If there are no Ethernet Adapters listed, then refer to the
Ethernet card manufacturer for installation instructions.
lV
4. Click the IP Address tab and select Obtain an IP address automatically.
10
Before you Connect the Home Gateway
5. Click the Gateway tab. If there is an IP address in the Installed gateways box, click
on the IP address and then click Remove.
"Installed
Gateways" box
6. Click on the DNS Configuration tab. Select Disable DNS.
Before you Connect the Home Gateway
lV
11