ActionTec R1020S(U) User Manual page 26

Click OK, then click Close and restart your computer when prompted.
Protocols
Select All Protocols from the drop down list in the Bindings tab. (This is not the same
as the Protocols tab)
Expand all entries by clicking on plus (+) signs
TCP/IP Protocol should be bound to the adapter
WINS Client (TCP/IP) should be bound to the adapter
XlII
50
Appendix A
Adapters
Select All Adapters from the drop down list in the Bindings tab.
Expand all entries by clicking on plus (+) signs
The adapter should be bound to the TCP/IP Protocol
WINS Client (TCP/IP) should be bound to Server and Workstation
Verifying Settings
After you have restarted your computer, verify your settings. Click Start, select
Programs and then select Command Prompt. At the command prompt, type "ipcon-
fig/all" to verify that you received an IP address. You may close this window once you
have verified your IP address.
XlII
51
Appendix A