ActionTec R1020S(U) User Manual page 30

4. In the following screen please select File and printer sharing for Microsoft
Networks from the given list. Click OK.
5. In the "File and Print Sharing" screen make sure that both of the selections have a
check mark beside them. If they do not, please click on the box next to each state-
ment and then click OK.
XlV
58
Appendix B
6. After you have clicked OK you will return to the network screen from step 2. Please
click on the Identification tab (see the first image on page 26).
Computer Name: In this field you can type any name you want. (i.e. My
Computer, John, CPU654) Do not use the same name for each computer you
wish to have on your network, and we do not recommend including spaces in
the computer name.
Workgroup: This field enables you to set a unique name for your network. This
name must be set up on every other computer you wish to have on your net-
work.
Computer Description: You can enter anything you wish. Traditionally, the
location name or main user's name is used in this field.
7. Click on the Configuration tab. This will take you back to the screen from step 2.
In the "Primary Network Logon:" box, located just above the "File and Print
Sharing" button, make sure that Client for Microsoft Networks is selected. If it is
not then click the down arrow and select it from the given list. Click OK.
8. A screen will appear asking you to restart your computer. Click Yes to restart the
computer. If you do not see this screen please restart your computer manually. After
XlV
59
Appendix B