ActionTec R1020S(U) User Manual page 4

3. Ensure your Ethernet device is selected
lV
4. Click More Info
5. Write down the following information for installation and future reference:
6
Before you Connect the Home Gateway
Your Host/Computer name and Workgroup name (Your ISP may use this information
to verify your identity on their network) (Cable only)
Select your
Ethernet
device here
Host Name __________________________
(Example: CY57640-A.cospgs1.co.home.com)
DNS Servers
(Example: 24.5.68.33)
Your Secondary DNS server address ______.______.______.______
(Click on the ... button to change the listing)
IP address __________________________
(Example: 24.253.117.45)
Subnet Mask (If assigned) ______.______.______.______
(Example: 255.255.255.0)
Default Gateway (If assigned) ______.______.______.______
Adapter Address _____-_____-_____-_____-_____-_____
(Example: 00-20-78-0F-B8-F0)
Your LOGIN name and PASSWORD (DSL only, provided by your ISP)
___________________________
___________________________
______.______.______.______
(Example: 24.253.117.1)
___________________________
For a listing of the information required for the major broadband ISP's, please
visit the following Website and select your specific ISP. Please make sure that
you have this information available when you configure the Actiontec
Wireless-Ready Home Gateway.
HTTP://www.actiontec.com/support/homegateway/index.html
Before you Connect the Home Gateway
___________________________
7
lV